18-8 Stainless

18-8 is a 300 series stainless steel that is comprised of approximately 18% chromium and 8% nickel. It is resistant to corrosion and may be mildly magnetic. Below are some of the products that we offer in 18-8 stainless.

Slotted
  • Slotted wood screws (Size ranges: diameter 3 – 18 and length 3/8 – 4)
    • Flat, round, and oval
  • Slotted tapping screws (Size ranges: diameter 4 – 14 and length 3/8 – 3)
    • Flat, pan, oval, round, and truss
  • Slotted machine screws (Size ranges: diameter 0-80 – 1/2-13 and length 1/8 – 6)
    • Flat, pan, oval, round, truss
  • Slotted indented hex washer head (Size ranges: diameter 6 – 14 and length 3/8 – 4)

Phillips
  • Phillips wood screws (Size ranges: diameter 4 – 14 and length 3/8 – 3)
    • Flat head only
  • Phillips tapping screws (Size ranges: diameter 0 – 14 and length 1/8 – 6)
    • Flat, pan, oval, round, and truss
  • Phillips machine screws (Size ranges: diameter 0-80 – 3/8-16 and length 1/8 – 6)
    • Flat, pan, oval, round, and truss

Metric
  • Metric hex head cap screws (Size ranges: diameter M03 – M16 and length 10 – 150)
  • Metric hex nuts (Size ranges: diameter M3 – M20)
  • Metric washers (Size ranges: diameter M2 – M20)
  • Metric threaded rod (Size ranges: diameter M5 – M16)
  • Metric machine screws (Size ranges: diameter M03 – M10 and length 8 – 50)
    • Flat head and pan head
  • Metric socket cap screws (Size ranges: diameter M02 – M12 and length 8 – 100)
  • Metric cup point socket set screws (Size ranges: diameter M3 – M10 and length 8 – 50)
  • Metric button head cap screws(Size ranges: diameter M03 – M12 and length 4 – 80)
  • Metric flat socket cap screws (Size ranges: diameter M3 – M12 and length 5 – 120)

Square Drive
  • Square drive tapping screws (Size ranges: diameter 4 – 14 and length 1/2 – 3)
    • Flat, pan, and oval
  • Square drive machine screws
    • Flat and pan
  • Square drive decking screws (Drive #2, Size ranges: diameter 6 – 10 and length 1 – 3-1/2)
  • Square drive finishing screws (Drive #1, Size ranges: diameter 7 and length 1 – 3)

Bolts
  • Carriage bolts (Size ranges: diameter 10-24 – 5/8-11 and length 1/2 – 18)
  • Lag bolts (Size ranges: diameter 1/4 – 3/4 and length 1 – 12)
  • Hex tap bolts (Size ranges: diameter 1/4-20 – 3/4 and length 1-1/4 – 6)
  • Hex cap screws (Size ranges: diameter 4-40 – 1-8 and length 3/8 – 12)
  • Strut bolts (Size ranges: diameter 1/4-20 – 1/2-13 and length 2-1/2 – 12)
    • Slotted flat head (Size ranges: length 4 – 12)
    • Used when maximum strength and watertight integrity is required
    • Full-bodied with cut threads
    • 2-1/2″ thread length

Nuts
  • Machine screw nuts (Size ranges: 1-72 – 12-24)
  • Finished full nuts (Size ranges: 1/4-20 – 1-1/2-6)
  • Finished jam nuts (Size ranges: 1/4-20 – 1-14)
  • Nylon insert locknuts (Size ranges: 2-56 – 1-14)
  • Capnuts (Size ranges: 4-40- 3/4-10)
  • Wing nuts (Size ranges: 6-32- 5/8-11)
  • P.M. nuts (Size ranges: 4-40 – 1/4-20)
  • Coupling nuts (Size ranges: 1/4-20 – 3/4-10)
  • Keps nuts (Size ranges: 4-40 – 3/8-24)
  • Tee nuts (Size ranges: 6-32 – 1/2-13)
  • Thin locknuts (Size ranges: 4-40 – 3/4-10)
  • Flange nuts (Size ranges: 6-32- 1/2-13)
  • Small pat hex nuts (Size ranges: 4-40 – 10-32)
  • Heavy full hex nuts (Size ranges: 1/4-20 – 1-1/2-6)
  • Heavy jam hex nuts (Size ranges: 1/4-20 – 1-3/4-5)

Socket
  • Socket cap screws (Size ranges: diameter 0/80 – 1/2-20 and length 1/8 – 3)
  • Button cap screws (Size ranges: diameter 2/56 – 1/2-20 and length 1/8 – 6)
  • Flat socket cap screws (Size ranges: diameter 0/80 – 3/4-10 and length 1/8 – 6)
  • Socket set screws (Size ranges: diameter 2-56 – 1/2-13 and length 3/32 – 2)

Washers
  • Flat washers (Size ranges: bolt size 0 – 1, I.D. .0625 – 1.062, and diameter 0 – 2)
  • MS washers (Size ranges: bolt size 0 – 10, I.D. .078 – 1.062, and diameter 0 – 1)
  • AN washers (Size ranges: size C2 – C1616 and I.D. .099 – 1.016)
  • NAS washers (Size ranges: size 0 – 416L and I.D. .063 – .255)
  • Fender washers (Size ranges: bolt size 10 – 1/2 and diameter 6 – 1/2)
  • Finish washers (Size ranges: box size 4 – 5/16)
  • Lock washers (Size ranges: box size 4 – 1-1/2 and diameter 2 – 1)
  • Internal tooth lock washers (Size ranges: box size 2 – 3/4 and per C 2.30 – 93.50)
  • External tooth lock washers (Size ranges: box size 2 – 3/4 and per C 2.30 – 93.50)

Miscellaneous
  • One-way partition bolts (Size ranges: diameter 10-24 and length 1/2 – 1-1/4)
  • Threaded rod (Size ranges: diameter 4-40 – 1-8 and length 3′ and 6′)
  • Unthreaded rod (Size ranges: diameter 1/8 – 1 and length 3′, 6′, and 12′)
  • Cotter pins (Size ranges: diameter 1/32 – 1/2 and length 1/2 – 2)
  • Threaded nails (Size ranges: diameter .065 – 16D (15 – 6) and length 3/4 – 4)
  • Siding nails (Size ranges: diameter .083 – .12 (14 – 11) and length 1-1/4 – 3-1/2)